Flyrite Choppers • Old School Bobbers and Choppers • 512.918.CHOP • FRC Parts

Mouse over image to enlarge

Click below
to purchase

*NEW* FRC Narrow Apes - 12"
Chrome plated 1" steel tubing -- 33 " wide, 7 " center, no recess, no knurling

$35

*NEW* FRC Narrow Apes - 16"
Chrome plated 1" steel tubing -- 33 " wide, 7" center, no recess, no knurling

$40

FRC Shorty Springer
Flyrite Choppers - FRC Shorty Springer - chromed. Measures 17 1/2 inches from bottom of neck to rear rocker pivot. Includes ¾ inch front axle.

Call for availability

FRC Stock Springer
Flyrite Choppers - FRC Stock Springer - chromed. Measures 21 1/2 inches from bottom of neck to rear rocker pivot. Includes ¾ inch front axle.

Call for availability

FRC NeveRust Fender Strut
Polished 420 Stainless Fender Strut for 5" flat fender (can be used on 6" as well).

Temporarily Out Of Stock

*NEW* FRC Panhead Valve Covers
Cast finned valve covers with 'Flyrite' lettering - for Panhead.
Includes stainless cap head screws. American made.

~~$225/pair~~
$200/pair
*SPECIAL*

FRC Points cover
Cast points cover with 'FRC' for BigTwin
Mounting hardware included

$20

FRC NeveRust Transmission Mounting Plate
Polished 420 Stainless Transmission mounting plate for use with all FRC frames and rolling chassis or your rigid frame application. For use with softtail transmission to rigid frame- no offset.

$40

FRC Side Mount License Bracket
Sidemount license/taillight mounts are fabricated with 10 gauge (approx. 1/8") steel and finished with semigloss powdercoat - designed to mount on axle. Left side bracket for 3/4" axle.
Hand fabricated in house at Flyrite Choppers.

$60

FRC Seat Pan
Consists of a heavy gauge steel pan, threaded bolts for seat/mouting hardware, pre-drilled for upholstering & finished in black semigloss powdercoat. This is the same pan used on FRC bikes.
Dimensions: 9” wide x 12½”long.
Hand fabricated in house at Flyrite Choppers.

$65

Drag Bars
Chrome plated 1" steel tubing -- 24 ½" wide, 5" pullback, 8" center, no recess

$15

Universal Throttle and Grips
Chrome plated throttle clamp with tension adjuster -- includes both grips -- fits 1" handlebars

$15

FRC Grips - black
Fits twist grip assemblies with a 1" & 1 1/8" size - 5 " long - black

$15

FRC Grips - metal flake red
Fits twist grip assemblies with a 1" & 1 1/8" size - 5" long - Deep Red Metal Flake

~~$15~~
$10
*SPECIAL*

FRC Grips - white
Fits twist grip assemblies with a 1" & 1 1/8" size - 5" long - Deep White

~~$15~~
$10
*SPECIAL*

FRC Grips - red
Fits twist grip assemblies with a 1" & 1 1/8" size - 5" long - Red

~~$15~~
$10
*SPECIAL*

Clutch Cables
Motion Pro clutch cable. Black vinyl LW (Longitudinally-wound). 1990 & later big twin. Comes in 62", 68" and 74" lengths.

$30

Choose Length

Throttle Cables
Motion Pro throttle cable. Black vinyl. Pre-1996 throttle housing with S&S carb. Comes in 32", 43 1/2" (sold out) and 48" lengths.

$20

Choose Length

Peanut Style Sportster Tank 2.25
2.25 gallon capacity. Comes with paintable Pop Up gas cap. Includes valve for emission system on bottom of tank. Fits 1993-1994.

~~$100~~
$90
*SPECIAL*

Peanut Tank
Stock style 2.4 gallon reproduction of OEM model #61006-63B - fits early Sportster® models from 1955-1978.
This is the tank used on the FRC bike models, check out pics on the bikes page.

$89

Gas Cap
Early Stock Style Vented Gas Cap.
As used on our bike models

$10

Early Style Chrome Petcock
OEM style petcock with 90° spigot. Fits all models up to 1975 with 3/8" NPT internal connector.
Fits Peanut tanks used on FRC bikes.

$15

Transmission Mounting Plate - 4 speed case
Reproduction of early style H-D® transmission mounting plate. For use with our Bobber rolling chassis or your rigid frame application. For use with 4 speed case transmissions (1936-1985 without trans mounted oil filer). Chrome plated.

$45

Oil Filter - black or chrome
Replaces HD 63796-77T
Fits all Big Twin 5 speed models 1980/88 (except dyna), all softtail models 1984/99 and Sportster Late 1984/later
As used on our bike models

$10

Choose Color

Kickstand Kit
Fits softtail models 1989 to present and custom applications.
1" under stock length kickstand kit, made from high quality steel with a show chrome finish.
As used on our bike models.

$65

Cat Eye Taillight
Comes with 12 volt bulb

Temporarily Out Of Stock

Maltese Cross Taillight
Comes with 12 volt bulb

~~$15~~
$10
*SPECIAL*

FRC Seat Bungs - weld on
Seat bungs as used on FRC frames

$12

Biltwell, Inc.

Flyrite Choppers is a Biltwell, Inc. Distributor/Dealer. We have the following products in-stock and ready to ship. All Biltwell, Inc.catalog items are available for order, call for information.

Biltwell, Inc. Exhaust Pipe Kit
Builder Exhaust Kit- a selection of pre-fabbed tubing, header flanges and exhaust tips

Temporarily Out Of Stock

Biltwell, Inc. Seat Bracket Kit
Made of 4130 chromoly steel. Engineered to fit the mounting studs on most solo seats. Features two long slots for adjustability. Black electroplated finish.

~~$44~~
$39
*SPECIAL*

Biltwell, Inc. Keystone Bars
Chrome or black electroplate finish - 1"
Made of 4130 chromoly steel.1" diameter.(Black finish pictured)

Temporarily Out Of Stock

Purchase items securely with PayPal by clicking 'BUY NOW' OR pay by VISA or MASTERCARD by phone! Call us with your order and we can take your payment by phone or you can send check/money order. You can also e-mail us with the items you'd like to order and we'll e-mail you back with a final total.
FRC Parts orders usually ship within 1 week .

Contact us by e-mail if you require international shipment, as postage costs are higher. Failure to contact us for the correct shipping fee may result in cancellation of international orders. Sorry no international credit cards are accepted by phone.

Refunds and Exchanges---- See TERMS & CONDITIONS

Return to Main STORE